The IMPress enclosure solution, designed for the global market, was launched on 15th June 2010 at the CommunicAsia2010 Singapore Expo.

The IMPress product range is an unique enclosure solution especially designed to address the major challenges faced by today’s Datacenter Managers. It is the result of a radically new design approach which sets it apart from conventional designs that have been the standard for decades.  IMPress introduces several highly customer-centric new features, the result of feedback from actual users gathered over many years. 

“The IMPress family for the housing of Servers and Networking equipment has been developed keeping in mind the problems faced by Integrators and Installers.  Based on an “Open Frame” concept, IMPress provides unmatched all-round accessibility, making equipment installation and cable management much easier than is possible with conventional “4 corner pillar” enclosure designs,” said E A Elias, Managing Director, APW President Systems.

The design goals for the IMPress emphasize ease-of-assembly at site, rapid deployment – by making it easy to gather in the pre-installed cables from overhead or under floor – and the orderly routing and termination of the optical fibre cable bunches. Several path-breaking new features and accessory items have been developed especially for the IMPress family so as to provide Datacenter Managers with a complete solution to the problems that they face routinely today.

IMPress from APW President
IMPress cabinets can be assembled at site in 20 minutes or less by a team of two persons using common hand tools. All parts and assemblies are designed for rapid installation and no adjustments are needed. All external covers and panels are latched from inside the cabinet, thus ensuring security. The rear of the cabinet has built-in provision for the installation of power distribution accessories and cable management channels. Here too the “Open Frame” design of the IMPress allows these accessories to be located at the extreme sides of the cabinet, leaving the centre space clear for the unimpeded flow of hot exhaust air from the equipment towards the fully perforated rear doors.  

IMPress Cabling Frame
The IMPress Cabling Frame, which is being introduced with the IMPress cabinet, will be of particular interest to Datacenter Managers. It is designed to be constructed at site from a kit and fits between two 600mm wide Server cabinets so as to form a 200mm wide compartment between them. Extensive cable management facilities are provided within the Cabling Frame for the orderly and safe routing and management of optical fibre cable bunches. Front and rear doors, that open either way, can be unlatched only after gaining access through the adjoining cabinets, thus maintaining the high level of security that is a feature of the IMPress.

The IMPress Cabling Frame eliminates the need to have 800mm wide networking cabinets solely for the housing and distribution of cables to Server Cabinets. This makes it possible for Datacenter planners to standardise on just one style of cabinet instead of two, and can also lead to savings in valuable floor space.

The IMPress family is a highly engineered and feature-rich enclosure solution which is the result of many years of experience in the industry. APW President has been assisted in this project by David Horne, who was the long serving Head of Design at APW Electronics UK, formerly Vero Electronics.

David has long been recognized as one of the top designers in the enclosure industry and was responsible for evolving the Imrak and Imserv range of cabinets with their distinctive design styling, which has since been replicated world-wide by the enclosure industry. David’s designs are based on simplicity in approach, clarity of purpose and an overall elegance – all of which are visible in the clean and elegant looks of the IMPress cabinet.  

Mumbai APW President Systems has introduced SmartRack, an innovative enclosure solution designed for small and mid size businesses and branch offices. This latest product introduction extends the company’s market reach into the fast-growing small-and-medium business segment. APW President leads the market for standard and custom-designed infrastructure management solutions. These solutions are deployed in various industry sectors such as IT and data networking, OEM / professional equipment manufacturing, scientific and analytical instrumentation and process automation.

“As leaders in infrastructure management systems, we continue to innovate and come up with finely engineered solutions that are designed to set standards in customer value. We have designed the SmartRack as a dedicated solution specifically addressing the networking infrastructure needs of small-and-medium size business users,” said E. A. Elias, Managing Director, APW President Systems.

The SmartRack features attractive styling that blends with modern office environments and is made entirely from high-quality steel. It is the latest addition to the “first family” of reliable and economical energy-saving IT networking solutions from President, which includes the UNISERV, CYBERack, Patchrack, FlexiBox, Server Lifter and CL-Amp.

Apart from housing different models and sizes of servers in a  standard enclosure format, the SmartRack can also accommodate a variety of  electronic equipment – like EPABXs, networking and communication devices that are commonly deployed in the office environment, but do not have a designated  space in the layout. 

“The SmartRack is designed to fit into modern office environments seamlessly, while offering all the economy and functionality of a mini-datacenter. From the outside this enclosure system looks like a high-quality office facility, while within lies a world-leading combination of expertise in rack design, backed by smart thermal and cable management features that allow a variety of servers and electronic equipment to be installed directly in one compact frame, eliminating the need for expensive and segregated data center space,” said S. Venkatraman, Assistant VP – Sales & Service, APW President Systems.

The SmartRack enables deployment of servers and network hardware neatly and efficiently in the office workspace, doing away with the need for dedicated computer rooms. It combines easy cable management and high thermal capacity with exceptional reliability and a truly all-inclusive, plug-and-play specification. A host of unique, installer-friendly features ensure quick and easy systems deployment and the office-quality appearance blends seamlessly into almost any office environment.

The product is being introduced through the company’s network of sales and service outlets in India.

About APW President

Headquartered in Mumbai, APW President Systems Limited is a 28-year-old company with a special proficiency in designing and delivering standard and custom-designed infrastructure management solutions. Service skills include IT infrastructure consulting, product design, customization, networking logistics and layout, and support and service packages for IT administration and strategic development.

For 28 years, world-class APW President solutions have been accepted by every prestigious name in Indian business. The company has customers in many countries, including the Middle East , Australia, Singapore and the US.

Backed by a countrywide network of sales offices, distributors and agents, the company’s highly trained team of sales engineers and technical support staff has rich experience in customer support. For more information about the company and products, visit APW President’s home page at www.apwpresident.com

For further information, please contact:

APW President Systems Ltd.

R-2, Technopolis Knowledge Park

Mahakali Caves Road

Andheri (East), Mumbai 400 093

Phone: 022 6644 8888, Fax: 022 6644 8899

E-Mail: info@apwpresident.com

Website: www.apwpresident.com

As one of the major providers of data center infrastructure solutions, APW President continues to innovate and come up with energy-saving solutions that are designed to set standards in customer value. In today’s data centers there is greater heat generation in equipment, and a greater demand on the cooling system. Most high-end computer servers now require careful engineering to remove the heat generated by it. So, in a typical data center design, every server location has to be provided with cool air at the optimal volume, temperature and humidity. “It is very common to find short-circuiting of air paths with the hot exhaust air from the cabinets returning directly back into the cold aisle and thereby reducing cooling effectiveness.  Significant improvement in cooling effectiveness, and thereby energy efficiencies, can be achieved by employing cold aisle containment systems.” said E. A. Elias, Managing Director, APW President Systems.

In the design of COOL WAY, optimally conditioned air is directed to a sealed cold aisle which ensures that the thermal variations within the data centre do not affect the volume of cold air delivered to the front of the IT equipment. This solution is being introduced through the company’s network of sales and service outlets in India and abroad.

“COOL WAY guides the cooled air from the air-conditioning inlet tiles on the raised floor into a sealed cold aisle between the server racks. Equipment inside the racks are cooled as much as required and they then exhaust the heated air into the surrounding room, where it rises to the top. The sealed COOL WAY system prevents the mixing of cool and warm air in the room and it ensures that the air returned to the air-conditioning units is always at a higher temperature,” explained S. Venkatraman, Assistant VP – Sales & Service,  APW President Systems.

“APW President has over 27 years of experience in innovating custom designs for infrastructure, systems management, operations and interactive interfaces across many application environments. COOL WAY reflects our commitment to meeting the immediate as well as future challenges of the data center administrator,” he added.

“APBIL, our new channel partner, has a reputation for driving market growth, fostering a value-creation strategy through additional products and service offerings for its customers as well as suppliers. With their operating efficiency, knowledgeable sales representatives, and established professional practices such as customized logistics, APBIL is well-positioned to win new markets and to continue breaking new ground. We expect to use their excellent channel know-how to increase the reach and availability of Flexibox, and to enable volume offtakes through bulk order booking,” said S. Venkatraman, Assistant VP – Sales & Service, APW President Systems.

According to industry estimates, the current market potential for wall-mount cabinets in India is about 200,000 units per annum, and it is growing at the rate of 20 percent annually. The Flexibox range of wall mount cabinets is positioned as an ideal solution for LAN and WAN applications. It is supplied as a completely-knocked-down (CKD) product packed in a box, thus making is easy to handle and store. The bolted construction offers flexibility of shipping in CKD or assembled condition, without any compromise on rigidity. Cable entry provision on top and bottom panels offers better cable management.

“As leaders in enclosure systems, we continue a tradition of adding value for our customers with outstanding products and through channel innovation. We have designed the FlexiBox specifically for addressing the equipment housing, switching and connectivity issues in local and wide area network administration,” said E. A. Elias, Managing Director, APW President Systems.

“FlexiBox’s design makes the job easy for LAN and WAN network architects, system installers and network administrators. It is a flexible modular open concept, which allows all-round accessibility and ease of maintenance. The versatile features provided with the FlexiBox makes it extremely easy to transport, install and configure,” said Venkatraman.

“APW President has over 27 years of experience in innovating custom designs for infrastructure, systems management, operations and interactive interfaces across many application environments. The FlexiBox reflects our commitment to meeting the immediate as well as the future challenges of the network administrator,” he added.

About Asia Pacific Brands India Ltd

APBIL is one of the major distributors in India for a range of IT and Industrial products. They have a joint venture with Grainger of the USA and are well known in the IT distribution business circles. For further details, visit the website: www.apbil.com

management solutions has today announced a strategic partnership with APW President Systems,

a provider of data centre infrastructure, to distribute its nlyte™ solution across India. APW

President Systems will be solely responsible for engaging new customers in the region, managing

local implementation and providing ongoing support.

nlyte™ is aimed at helping organisations achieve a complete view of their data centres, allowing

them to intelligently manage power consumption, reduce greenhouse emissions and increase the

lifetime of assets, among other benefits.

Pramod Agashe, Chief Operating Officer, APW President Systems, said: “We see our partnership

with GDCM as an opportunity to offer our customers the next generation of data centre

management systems to take their planning and green IT strategies to the next level. As an

established leader in the data centre infrastructure management space, APW President Systems

has been innovating for over 26 years to help customers in planning and maintaining high energy

efficiency levels, optimising space for their equipment, and monitoring and supporting them in

managing their data centre assets.”

nlyte™ is the only data centre management tool to provide an intelligent and automated view of all

physical and virtual assets and virtual workgroups within the data centre, using a web-based

graphical user interface. Designed to help data centre managers make the most of their IT

investments while minimising complexity and costs, it allows companies to model and manage

their hardware, capacity, power, cooling, networking and space, reduce redundancy, enhance

optimization and pro-actively forecast and plan the deployment of their assets.

Michael Evans, CEO of GDCM, said: “As India’s economy continues to grow at an exponential rate

and issues associated with power supplies and the hot climate continue, organisations in the

country have become in need of solutions which will allow them to manage their data centre

environments and control power and cooling requirements. We look forward to working in

partnership with APW President Systems to enable businesses to overcome these challenges by

using nlyte and we recognise APW President Systems as a natural extension of GDCM”

- ends -

About Global DataCenter Management Limited (GDCM)
Global DataCenter Management (GDCM) was founded in 2003 with the aim of allowing

organisations to increase efficiency and reduce cost within data centers – as well as to reducing

power consumption and addressing environmental obligations. Today, GDCM provides data

center software and consultancy services designed to help data center managers make the most

of their IT investments while minimizing complexity and costs. GDCM’s flagship product, nlyte™, is

the only data center management tool to provide an intelligent and automated view of all physical

and virtual assets and workgroups within the data center.

http://www.gdcm.com/

About APW President Systems
APW President Systems Ltd (popularly known as President Systems)  is a leader in the enclosure

systems segment, with over 500 customers in India and abroad. Over the last 26 years, the

company has established a reputation for high quality and reliability of products and services that

address the infrastructure requirements of IT / ITES, Telecom and General Electronics

customers.

http://www.apwpresident.com

For further media information, please contact:

Caroline PowerAshwin Kadle
APW President Systems
R2, Technopolis Knowledge Park
Mahakali Caves Road, Andheri (E)
Mumbai-400 093

Tel:     +91-22-66448888
Mob:   93241-77842
Email: Band and Brown Communications
Dl: +44 (0) 207 419 7309
caroline@bbpr.comashwin@apwpresident.com

management facility, continuing a long tradition of innovation.

Raised floors are an option for installations that include a large number of cables in today’s IT,

Networking and Data Centers. They are more efficient and less costly than overhead systems,

where hot air rises. Instead of running cables through the ceiling, contractors can easily pull them

under the raised flooring. The solutions offer cooling, reduction in the number and volume of

discreet cables, efficient consolidation of physical hardware ports and reduced jumper cable

lengths for above-floor management. Since they offer the appeal of easier upgrading, designers

and contractors are seeking out efficient solutions for adding and removing cabling and

applications through raised-floor systems. But raised floor installations are becoming more

challenging.

“In the planning of the raised-floor system, cable management is a significant challenge in today’s

IT, Networking and Data Centers. A good cable management system can actually make installation

easier, improve airflow in cabinets and racks, saving power and aiding in equipment cooling,” said

S. Venkatraman, Associate Vice-President, Sales & Services, APW President.

“In this context, the innovative pre-slotted brushed tile system from APW President addresses

several problem areas of installation, including the damage likely due to bending of cables and

cold air leakages from tile slots. It is designed to offer valuable benefits to our Data Center

customers,” he added.

Installation simplified

The pre-slotted brushed tile is a CRCA (Cold Rolled Cold Annealed) fabricated tile, with 4 slots of

70 x 440mm long. These fabricated tiles are designed, similar to the conventional 600 x 600mm

tile in a data Center. The slots on the brushed tile are provided with smooth beading on the edges,

thus preventing any possible damage to the data cable while bending it through. The cutout

profiles on the brushed tiles are covered with nylon bristle brush panels. These brush panels, while

allowing data cables to pass through snugly, can spring back and interlock when there are no

cables, actively sealing the slot and preventing leakage of under floor cold air through the cutout.

The current practice followed in most Data Centers is to make a cutout slot on the conventional

square tile to allow cables below the raised flooring to pass through. This practice, however, has

several drawbacks:

•    Delay: the cabling team has to wait for the cutout slot to be provided on the tile, which

means a loss of time.

•    Inefficient airflow: cold air leakage from the cutout slot.

•    Pollution: the tile cutting spreads fine dust all over the place, adding to pollution

•    Damage: sharp edges on the slot can cut into the cable passing through, thereby

damaging it

•    Non-reusable: no flexibility of relocating the tile with the cutout slot, and hence it cannot

be used more than once.

Advantages of Brushed Tiles

As seen in the picture above, conventional tiles below the cabinet where the cabling is required are

replaced by the pre-slotted brushed tiles. This allows the cables positioned below the raised floor

to enter the cabinet smoothly, with no damage.

•    No pollution: brushed tiles are pre-slotted, thus avoiding the pollution associated with the

on-site cutting of conventional tiles.

•    Air seal: All slots have self-sealing brush panels to prevents cold air escaping through.

•    Quicker installation: replacing conventional tiles with brushed tiles speeds up the cabling

installation process as they are ready to use

•    Reusable: Relocation of the brushed tile is possible, rather than having to scrap the

conventional tile once it has been cut for a specific position.

•    Manageability: cables are routed safely, neatly and in an uncluttered path.

About APW President

Headquartered in Mumbai, APW President Systems Limited is a 25-year-old company engaged in

the business of designing, manufacturing and supplying modular enclosure systems for use in

computer and telecommunication networks, industrial control systems and general electronics

applications. The company also provides Internet based products for the centralized management

of enterprise Data Centers, besides self-service kiosks.

These products and services offer a versatile packaging and remote facilities management

platform, which can be deployed in business-critical environments where network performance,

reliability, security and ease of operation are essential. APW President has developed special

proficiency in designing and delivering custom designed infrastructure solutions. Service skills

include IT infrastructure consulting, product design, customization, networking logistics and layout,

and support.

For over 25 years now world-class solutions from President have been accepted by every

prestigious name in Indian business, and they are also exported to more than a dozen countries -

including Australia, USA, Singapore and the Middle East

Backed by a countrywide network of sales offices, distributors and agents, the company’s highly

trained team of sales engineers and technical support staff has rich experience in application

engineering, packaging solutions and customer support.

For more information about the company and its products, visit APW President’s Home page at

www.apwpresident.com

For further information, please contact:

APW President Systems Ltd.
R-2, Technopolis Knowledge Park
Mahakali Caves Road
Andheri (East), Mumbai 400 093

Systems with LAN-WAN architecture with the introduction of the APW President FlexiBox,

continuing a long tradition of innovation. The FlexiBox is the latest addition to the first family of

networking solutions from President – which includes the UNISERV, CYBERack and Patchrack.

While the Uniserv is optimized for housing computer servers, the Cyberack is ideal for providing a

reliable and secure frame for critical networking infrastructure, while the PatchRack is a highly

versatile 2-post rack for the effective management of cables. The Flexibox addresses the needs

of small equipment clusters in LANs and WANs.

The Flexibox range of wall mount cabinets from APW President is an ideal solution for LAN, WAN

applications. The Flexibox is supplied as a completely-knocked-down (CKD) product packed in a

box, thus making is easy to handle and store. The bolted construction offers flexibility of shipping

in CKD or assembled condition, without any compromise on rigidity.  Cable entry provision on top

and bottom panels offers better cable management.

The latest product introductions extend the company’s already established family of world-class

modular enclosure systems that the company makes in India and exports around the world. APW

President leads the market in standard and custom-designed infrastructure, system management,

operations and interactive interface solutions for various industry sectors such as IT and data

networking, OEM / professional equipment manufacturing, scientific and analytical instrumentation

and process automation.

“As leaders in enclosure systems, we continue to innovate and come up with finely engineered

solutions that are designed to set standards in customer value. We have designed the FlexiBox

specifically for addressing the equipment housing, switching and connectivity issues in local and

wide area network administration,” said E. A. Elias, Managing Director, APW President Systems.

The product is being introduced through the company’s network of sales and service outlets in

India and abroad.

“FlexiBox’s design makes the job easy for LAN and WAN network architects, system installers and

network administrators. It is a flexible modular open concept, which allows all-round accessibility

and ease of maintenance. The versatile features provided with the FlexiBox makes it extremely

easy to transport, install and configure,” said Nilesh Joshi, General Manager – Marketing & Kiosks,

APW President Systems.

“APW President has over 25 years of experience in innovating custom designs for infrastructure,

systems management, operations and interactive interfaces across many application

environments. The FlexiBox reflects our commitment to meeting the immediate as well as the

future challenges of the network administrator,” he added.

About APW President

Headquartered in Mumbai, APW President Systems Limited is a 25-year-old company engaged in

the business of designing, manufacturing and supply of modular enclosure systems for

infrastructure, system management, operations and interactive interfaces (such as touch-screen

technology kiosks). These products offer a versatile packaging and remote facilities management

platform, which can be deployed in business-critical environments where network performance,

reliability, security and ease of operation are essential.

APW President has developed special proficiency in designing and delivering custom designed

infrastructure solutions. Service skills include IT infrastructure consulting, product design,

customization, networking logistics and layout, and support and service packages for IT

administration and strategic development.

For over 25 years, world-class APW President solutions have been accepted by every prestigious

name in Indian business, and they are exported to several countries as well. Products are shipped

to 20 countries, including Australia, USA, Singapore and the Middle East.

Backed by a countrywide network of sales offices, distributors and agents, the company’s highly

trained team of sales engineers and technical support staff has rich experience in customer

support. For more information about the company and products, visit APW President’s home page

at www.apwpresident.com

For further information, please contact:

APW President Systems Ltd.
R-2, Technopolis Knowledge Park
Mahakali Caves Road
Andheri (East), Mumbai 400 093

The TableRack is ideal for use by small businesses, self-employed individuals and professionals such as doctors, lawyers, tax consultants, estate agents and others who require to secure their information database. They are also well suited for use in educational institutions such as schools, colleges, R&D establishments, nursing homes, stores and other small business establishments.

The TableRack is the latest addition to the first family of networking enclosures from President – which includes the UNISERV, CYBERack and FlexiBOX, among others. While the Uniserv is optimized for housing computer servers, the Cyberack is ideal for providing a reliable and secure frame for critical networking infrastructure, while the Flexibox addresses the needs of small equipment clusters in LANs and WANs. The new TableRack complements this family by offering a compact and sturdy packaging solution.

The TableRack series is designed for table-top and floor standing use. The product is similar to the wall mount units, but with a front and rear door.  They are meant for use either on the table top (with feet) or under the table (with castors). They accept all equipment conforming to 19″ rack mounting specifications.

The latest product introductions extend the company’s already established family of world-class modular enclosure systems that the company makes in India and exports around the world. APW President leads the market in standard and custom-designed infrastructure, system management, operations and interactive interface solutions for various industry sectors such as IT and data networking, OEM / professional equipment manufacturing, scientific and analytical instrumentation and process automation.

“As leaders in enclosure systems, we continue to innovate and come up with finely engineered solutions that are designed to set standards in customer value. We have designed the TableRack specifically for addressing the equipment housing problems of small business users, professionals in service functions and institutions,” said E. A. Elias, Managing Director, APW President Systems.

The product is being introduced through the company’s network of sales and service outlets in India and abroad.

“TableRack’s design addresses the problems of users faced with the headache of working with limited space and with assorted expensive electronic equipment that need rugged and secure enclosures, adequate ventilation and cooling and safe cable and wire handling” said Nilesh Joshi, General Manager – Marketing & Kiosks, APW President Systems.

“APW President has over 25 years of experience in innovating custom designs for infrastructure, systems management, operations and interactive interfaces across many application environments. The TableRack reflects our commitment to needs of the small business users, thus making it a sound investment that provides safety and security for costly equipment,” he added.

About APW President

Headquartered in Mumbai, APW President Systems Limited is a 25-year-old company engaged in the business of designing, manufacturing and supply of modular enclosure systems for infrastructure, system management, operations and interactive interfaces (such as touch-screen technology kiosks). These products offer a versatile packaging and remote facilities management platform, which can be deployed in business-critical environments where network performance, reliability, security and ease of operation are essential.

APW President has developed special proficiency in designing and delivering custom designed infrastructure solutions. Service skills include IT infrastructure consulting, product design, customization, networking logistics and layout, and support and service packages for IT administration and strategic development.

For over 25 years, world-class APW President solutions have been accepted by every prestigious name in Indian business, and they are exported to several countries as well. Products are shipped to 20 countries, including Australia, USA, Singapore and the Middle East.

Backed by a countrywide network of sales offices, distributors and agents, the company’s highly trained team of sales engineers and technical support staff has rich experience in customer support. For more information about the company and products, visit APW President’s home page at www.apwpresident.com

For further information, please contact:

APW President Systems Ltd.
R-2, Technopolis Knowledge Park
Mahakali Caves Road
Andheri (East), Mumbai 400 093

Phone: 022 6644 8888, Fax: 022 6644 8899

E-Mail: info@apwpresident.com

Website: www.apwpresident.com

While the Uniserv is optimized for housing computer servers, the Cyberack is ideal for providing a reliable and secure frame for critical networking infrastructure, while the Flexibox addresses the needs of small equipment clusters in LANs and WANs. The new PatchRack complements this family by offering a highly versatile 2-post rack for the effective management of cables – both copper and fibre – in datacommunication networks.

The latest product introductions extend the company’s already established family of world-class modular enclosure systems that the company makes in India and exports around the world. APW President leads the market in standard and custom-designed infrastructure, system management, operations and interactive interface solutions for various industry sectors such as IT and data networking, OEM / professional equipment manufacturing, scientific and analytical instrumentation and process automation.

“As leaders in enclosure systems, we continue to innovate and come up with finely engineered solutions that are designed to set standards in customer value. We have designed the PatchRack specifically for addressing the cable management problems of the data communications administrator,” said E. A. Elias, Managing Director, APW President Systems.

The product is being introduced through the company’s network of sales and service outlets in India and abroad.

“PatchRack’s design has evolved from years of experience in working with network architects and system installers. It is based on the use of a robust modular open frame. This design approach allows all-round accessibility as well as the facility to add on any number of additional modules to cater for future growth. The outstanding cable management features provided with the PatchRack makes it extremely versatile and easy to install and configure,” said Nilesh Joshi, General Manager – Marketing & Kiosks, APW President Systems.

“APW President has over 25 years of experience in innovating custom designs for infrastructure, systems management, operations and interactive interfaces across many application environments. The PatchRack reflects our commitment to the immediate as well as the future needs of the industry, thus making it a good investment that provides an ideal cable patching environment for even the most demanding, expanding, bandwidth-critical installations,” he added.

About APW President

Headquartered in Mumbai, APW President Systems Limited is a 25-year-old company engaged in the business of designing, manufacturing and supply of modular enclosure systems for infrastructure, system management, operations and interactive interfaces (such as touch-screen technology kiosks). These products offer a versatile packaging and remote facilities management platform, which can be deployed in business-critical environments where network performance, reliability, security and ease of operation are essential.

APW President has developed special proficiency in designing and delivering custom designed infrastructure solutions. Service skills include IT infrastructure consulting, product design, customization, networking logistics and layout, and support and service packages for IT administration and strategic development.

For over 25 years, world-class APW President solutions have been accepted by every prestigious name in Indian business, and they are exported to several countries as well. Products are shipped to 20 countries, including Australia, USA, Singapore and the Middle East.

Backed by a countrywide network of sales offices, distributors and agents, the company’s highly trained team of sales engineers and technical support staff has rich experience in customer support. For more information about the company and products, visit APW President’s home page at www.apwpresident.com

For further information, please contact:

APW President Systems Ltd.R-2,
Technopolis Knowledge Park
Mahakali Caves Road
Andheri (East), Mumbai 400 093

Phone: 022 6644 8888, Fax: 022 6644 8899

E-Mail: info@apwpresident.com

Website: www.apwpresident.com