Sensors

Email This Page Email This Page Print this page

Sensors are external to the Hawki2 unit.

A sensor is a device that measures a physical quantity and converts it into a signal which can be read by an observer or by an instrument. A sensor’s ‘sensitivity’ is the degree to which its output changes when the measured quantity changes. The appropriate sensors may be selected based on the parameter one needs to monitor.

Temperature Sensor


Technical Specifications:

  • Temperature Monitoring Range:0oC to 60oC
  • Temperature Monitoring Accuracy: ± 5% Standard Transducer @ 20oC
  • Temperature Hysteresis: Programmable 0.1oC to 9.9oC in 0.1oC increments
  • The Sensor is supplied with 2m of cable terminated with an RJ10 for direct connection to one of the Hawk-i2 sensor ports.

Humidity Sensor

Technical Specifications:

  • Humidity Monitoring Range: 30% to 90% Humidity
  • Humidity Monitoring Accuracy: ± 5% RH @ 25oC
  • Humidity Hysteresis: Programmable 0.1%RH to 9.9%RH in 0.1 increments
  • The Sensor is supplied with 2m of cable terminated with an RJ10 for direct connection to one of the Hawk-i2 sensor ports. The Sensor is housed in a plastic enclosure for protection.

Water Sensor – Rope Type

Technical Specifications:

  • Control Housing is made from tough ABS plastic
  • Control Housing Dimensions: 74mm Wide x 50mm High x 27mm Deep
  • Standard Rope Length: 5m
  • Standard Control Cable Length: 2m (Terminated by RJ10 Connector)
  • Power Supply (5v – Powered by Hawk-i2)
  • Supply Current: 20mA.

Water Sensor (Contact Type)

Technical Specifications:

  • Compact Unit suitable for multiple installation locations
  • Contact Type
  • The Sensor is supplied with 2m of cable terminated with an RJ10 for direct connection to one of the Hawk-i2 sensor ports.

Smoke Detector

Technical Specifications:

  • Contact Type
  • Test Button
  • Easy Installation – Standard Fixings Supplied
  • The Sensor is supplied with 2m of cable terminated with an RJ10 for direct connection to one of the Hawk-i2 sensor ports.

PIR Sensor

Technical Specifications:

  • Contact Type
  • Can be powered directly from Hawk-i2 unit or external power Supply
  • Simple Installation (Fixings Supplied)
  • The Sensor is supplied with 2m of cable terminated with an RJ10 for direct connection to one of the Hawk-i2 sensor ports.

Beacon (No Sounder)
Technical Specifications:

  • Flashing Strobe Light (Standard Colour: Red)
  • Simple Installation (Fixings Supplied)
  • Powered directly from the Hawk-i2 unit
  • The Sensor is supplied with 2m of cable terminated with an RJ10 for direct connection to  one of the Hawk-i2 sensor ports.

Flashing Beacon – With Sounder


Technical Specifications:

  • Flashing strobe light
  • Standard colour: red and blue
  • Configurable alerts sounds (switch settings)
  • Volume control
  • Simple installation (fixings supplied)
  • Powered directly from the monitoring & control device
  • Supplied with 2m cable terminating in RJ45 for direct connection to the port on rear of monitoring & control device